This isn't a real big issue, but I would like to understand why this is happening.
VAC used for audio and to hear the side-tone on CW, I am using a pair of head-phones plugged into the front headphone audio port. This works fine, except when I switch from SSB to CW, I will usually have to "tweak" the TX AF number (either up or down by just 1) on the Transmit form. Not sure why that is necessary.
Below, see a partial view from the Transmit form.
73,
Juha
NI2M
Monitoring of CW
Monitoring of CW
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Monitoring of CW
What happens if you don't tweak it?
Re: Monitoring of CW
No side-tone
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18