No output from Thetis after Asus computer updates

[N4XD]

Operating system: W10
Recently did some updates to my Asus desktop. Running i7-11700. Updates included Bios and other items.

After update Thetis starts, sees the Anan 7000dle but, absolutely no rf from radio. Tried radio with another computer and no issues.

Did try the database reset but that made no difference. Any hints appreciated. My idea of the next step is to remove the latest version of thetis (I'm running v2.10.3.5x64 from 12/27/2023) with protocol 2 and then reinstall.

Thanks

Ron
N4XD

[K1LSB]

Consider updating to Windows 11?

Mark

[N4XD]

I'd prefer not to. Thetis works fine on a laptop running W10.

Some more testing reveals the transmit side of Thetis and the radio works fine. Its just the receive side. Completely blank display. No noise, nothing. Checked ADC settings are they show standard set up for P2. Antenna set up all good. I'd say its acting like no antennas are connected but even if that would be true, I'd see noise on Thetis. But nothing. Almost like the ptt switch is pushed but thetis shows it in receive mode.

I have reset data base and run new wisdom file. Still no joy.

Ron

[w-u-2-o]

It sounds like a Windows firewall problem. Try the firewall check in Thetis setup.

[N4XD]

Scott, thanks!

That's exactly what the issue was.

I ran Thetis as admin and did the check firewall. It came back as OK.

Next I opened my anti virus program, AVG free. It had somehow switched to "don't trust this network". Changed and indeed radio back up and working.

I really appreciate your input as this had me baffled. I REALLY didn't want to have to a fresh install of windows as reconfiguring everything is a REAL pain.

Ron
N4XD

[w-u-2-o]