Thetis v2.8.11 - UPDATES and current issues

User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby Tony EI7BMB » Tue Feb 15, 2022 1:00 pm

With help from Richie and Ernst I now have JTDX running for CAT and PTT. Thanks guys



TCI setting.png
TCI setting.png (238.96 KiB) Viewed 7980 times
sv1jso
Posts: 36
Joined: Wed May 30, 2018 7:06 pm

Re: Thetis v2.8.11 - UPDATES and current issues

Postby sv1jso » Tue Feb 15, 2022 1:26 pm

Hello Richie,

I use the TCI for log4om and tuner reminder with success but after an hour thetis shut down. Now when I try to connect something to the TCI server I get the following in the error log and thetis shutting down.

Entry : 3:20:37 PM Tuesday, February 15, 2022
Object reference not set to an instance of an object.
---------stacktrace------------
at Thetis.Console.OnTCIClientConnect()
at Thetis.TCPIPtciSocketListener.SocketListenerThreadStart()
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
-------------------------------

73 Mike SV1JSO
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Tue Feb 15, 2022 3:04 pm

Hello. I have the same error.


---------stacktrace------------
at Thetis.Console.OnTCIClientConnect()
at Thetis.TCPIPtciSocketListener.SocketListenerThreadStart()
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
-------------------------------
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Tue Feb 15, 2022 3:16 pm

yes there will be a version later today that resolves that issue

R.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Tue Feb 15, 2022 3:27 pm

*** updated test release 21k9pre8

A rework of some of the TCI server. Please try :

Download x64 [md5:3E0B3FB8CA895C3C6573D01F6DCB9C3E] - https://bit.ly/3uRXDVW

Thanks Richie.

[21k9pre8]
- rate limit added to TCI setup for outbound VFO/IF/DDS messages
- tci fixes and extra error checking
Aivars
Posts: 77
Joined: Sun Apr 09, 2017 11:12 pm

Re: Thetis v2.8.11 - UPDATES and current issues

Postby Aivars » Tue Feb 15, 2022 3:41 pm

Thanks Richie for update 8-)
YL2GVC 73!
User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby Tony EI7BMB » Tue Feb 15, 2022 3:41 pm

Thanks Richie, working fine here so far.
User avatar
w2ner
Posts: 98
Joined: Wed Sep 11, 2019 12:14 am
Location: SC

Re: Thetis v2.8.11 - UPDATES and current issues

Postby w2ner » Tue Feb 15, 2022 3:45 pm

Thanks RIchie
Last edited by w2ner on Tue Feb 15, 2022 4:07 pm, edited 2 times in total.
User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby Tony EI7BMB » Tue Feb 15, 2022 3:48 pm

w2ner wrote:Screen Shot 2022-02-15 at 10.47.05 AM.pngRichie

Did you move the TCI settings off the user interface tab?


In the same place here on K9 pre 8
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Tue Feb 15, 2022 3:57 pm

Thank you. Working
Yevgeni
Posts: 54
Joined: Sun Jun 27, 2021 8:23 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby Yevgeni » Tue Feb 15, 2022 4:31 pm

Thanks! TCI works!

And for RX2 there will be a СAT?
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Thetis v2.8.11 - UPDATES and current issues

Postby w-u-2-o » Tue Feb 15, 2022 5:36 pm

Yevgeni wrote:Thanks! TCI works!

And for RX2 there will be a СAT?

There is a full complement of CAT commands already implemented for RX2.

From a CAT perspective (not TCI) all the new IP port does is provide a separate mechanism for issuing CAT commands and receiving responses. Other than that it works identically to anything you can achieve using the serial CAT ports.

So did you really mean "When are TCI RX2 commands coming?"
Yevgeni
Posts: 54
Joined: Sun Jun 27, 2021 8:23 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby Yevgeni » Tue Feb 15, 2022 7:23 pm

w-u-2-o wrote:
So did you really mean "When are TCI RX2 commands coming?"


Perhaps I have misunderstandings.
Now I am working on 160 SSB. At this time, reception is on 80 m FT8, even at the time of my transmission on 160 m.
The communication log and the JTDX program are connected to Thetis via TCI.
Again, I may have made mistakes in this matter.
Attachments
SSB_FT8.jpg
SSB_FT8.jpg (762.34 KiB) Viewed 7827 times
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Tue Feb 15, 2022 7:51 pm

rx2 support is still not fully supported. Hopefully over the next few days.

Richie.
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Tue Feb 15, 2022 7:55 pm

Problem. When communicating with TCI, JTDX does not work for transmission through VAC. Reception is working. When the settings are changed to CAT, transmission via VAC is resumed.
User avatar
oe3ide
Posts: 389
Joined: Tue May 05, 2020 8:36 am
Location: JN78XK
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby oe3ide » Tue Feb 15, 2022 8:04 pm

RU6AI wrote:Problem. When communicating with TCI, JTDX does not work for transmission through VAC. Reception is working. When the settings are changed to CAT, transmission via VAC is resumed.


Do you have TCI-Audio enabled? That would not work. TCI-Audio is not implemented yet.
Activating TCI as transceiver interface (instead of OmniRig or hamlib) has no influence on the audio in/output.

jtdx_tci_conn.jpg
jtdx_tci_conn.jpg (56.51 KiB) Viewed 7801 times


jtdx_audio.jpg
jtdx_audio.jpg (78.87 KiB) Viewed 7801 times


73 Ernst
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Tue Feb 15, 2022 8:12 pm

No... Everything is the same.
Attachments
111111.jpg
111111.jpg (49.11 KiB) Viewed 7794 times
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Tue Feb 15, 2022 8:15 pm

When I switch the transceiver control to TPI, the audio signal for transmission disappears. Everything is fine with the reception. As soon as I switch back to CAT, everything returns to normal. I don't change the AUDIO settings
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Tue Feb 15, 2022 8:24 pm

yep make sure use tci audio is checked off, and you hit refresh to get the audio devices listed, then select suitable ones

Richie.
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Tue Feb 15, 2022 8:29 pm

That's exactly what I did .. I did not connect AUDIO TCI and did not change anything ..
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Tue Feb 15, 2022 8:33 pm

vac is set correctly in Thetis? Mute the vac? gain level? rx1 af level ? Line 1 + Line 2 set the correct way around to match the in/outs?

R.
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Wed Feb 16, 2022 5:34 am

Yes..When switching to CAT everything works fine.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Wed Feb 16, 2022 6:29 am

RU6AI wrote:Yes..When switching to CAT everything works fine.


cant explain it, works fine here. TCI audio off in JTDX, and audio devices set to match those in Thetis.

Richie.
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Wed Feb 16, 2022 6:37 am

Ok. Most likely something local .. I have.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Wed Feb 16, 2022 6:46 am

RU6AI wrote:Ok. Most likely something local .. I have.


latest JTDX?

R.
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Wed Feb 16, 2022 8:59 am

JTDX 2.2.158
Changed the VAC program. Did not help.
Attachments
64.jpg
64.jpg (67 KiB) Viewed 7594 times
5.jpg
5.jpg (85.75 KiB) Viewed 7594 times
4.jpg
4.jpg (69.65 KiB) Viewed 7594 times
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Wed Feb 16, 2022 9:17 am

*** another day/hour, another test version - 21k9rc1

Moving on towards getting this at the the top of the thread. Please try :

Download x64 [md5:71BF4FDFE6912AA9D01A67DE5320A37A] - https://bit.ly/3GMUppa

Thanks, Richie.

[21k9rc1]
add: warnings added to setup-dsp if settings do not match. Remember, if a mode uses a different TX profile, that profile may have different dsp settings as well, causing additional dsp rebuild time
add: improvements to TCI. Should now be able to TX through RX2 in JTDX for example. Note: split op needs work on RX2, so use fake or none in jtdx if using RX2 as the tx
fix: mon now works for audio on vac2, and can also be volume adjusted. Still no vac mon when using vfob split on RX1
fix: recording playback when TX'ing can be mon volume adjusted. Recording playback when not tx'ing is RX volume
fix: TCI rate limit should now work as expected
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby ramdor » Wed Feb 16, 2022 9:21 am

@RU6AI - I cant explain it. If you set the vac device in Thetis to headset/speakers do you hear ft8 signals? If all else fails. RX levels are up, mute is off, AGC level is ok etc etc, then back your database up and try a fresh one. Stranger things have happened.

Richie.
User avatar
oe3ide
Posts: 389
Joined: Tue May 05, 2020 8:36 am
Location: JN78XK
Contact:

Re: Thetis v2.8.11 - UPDATES and current issues

Postby oe3ide » Wed Feb 16, 2022 9:27 am

TDX 2.2.158
Changed the VAC program. Did not help.


just some ideas:
* maybe you have enabled mute? (mute works now also on VAC)
* is it only rx or also tx
* do you get audio (power out) when pressing "Tune" in JTDX
* do you "see" audio going out in Voicemeeter when pressing "Tune" in JTDX

73 Ernst
RU6AI
Posts: 16
Joined: Tue May 02, 2017 7:34 am

Re: Thetis v2.8.11 - UPDATES and current issues

Postby RU6AI » Wed Feb 16, 2022 9:32 am

Yes .. The same is not clear. It shouldn't be, but for some reason it is. On a regular CAT, everything works properly. I will sort this out. Thank you.

Return to “Thetis”