Thetis v2.9.0 - Updates and Issues
Re: Thetis v2.9.0 - Updates and Issues
@ramdor
Richie--the Two Tone CAT command is broken.
Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".
Using the 2TON button on the UI works as expected: drive power is achieved.
Using zztu1; 2TON is produced at the tune power setting.
If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.
If it matters, hardware is an 8000DLE.
Now just waiting for Rob to update button and slider packs
Richie--the Two Tone CAT command is broken.
Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".
Using the 2TON button on the UI works as expected: drive power is achieved.
Using zztu1; 2TON is produced at the tune power setting.
If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.
If it matters, hardware is an 8000DLE.
Now just waiting for Rob to update button and slider packs
Re: Thetis v2.9.0 - Updates and Issues
oe3ide wrote:Josef, you can copy
ptbAF-head.png to ptbTune-head.png
and
ptbAF-back.png to ptbTune-back.png
73 Ernst
Ernst,
tnx for the hint, its working.
73 Josef
Actual system: ANAN-7000DLE MKII Protocol 2, external PC Ryzen 5600G, direct ethernet connection.
Re: Thetis v2.9.0 - Updates and Issues
w-u-2-o wrote:@ramdor
Richie--the Two Tone CAT command is broken.
Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".
Using the 2TON button on the UI works as expected: drive power is achieved.
Using zztu1; 2TON is produced at the tune power setting.
If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.
If it matters, hardware is an 8000DLE.
Now just waiting for Rob to update button and slider packs
Quick look at the code and ZZTU does tune, not 2Tone.
Do you want ZZUT ?
R.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
Richie,
Neither RX1 or RX2 are receiving any signal for me. Attached are screenshots of my ADC tab and the generated ErrorLog.
Radio is black case 7000DLE MKII running Protocol 2.
Thanks,
Mark
Neither RX1 or RX2 are receiving any signal for me. Attached are screenshots of my ADC tab and the generated ErrorLog.
Radio is black case 7000DLE MKII running Protocol 2.
Thanks,
Mark
Re: Thetis v2.9.0 - Updates and Issues
ramdor wrote:w-u-2-o wrote:@ramdor
Richie--the Two Tone CAT command is broken.
Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".
Using the 2TON button on the UI works as expected: drive power is achieved.
Using zztu1; 2TON is produced at the tune power setting.
If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.
If it matters, hardware is an 8000DLE.
Now just waiting for Rob to update button and slider packs
Quick look at the code and ZZTU does tune, not 2Tone.
Do you want ZZUT ?
R.
Argh! Yes, I meant "ZZUT", my apologies. I'm not dyslexic, really!
Re: Thetis v2.9.0 - Updates and Issues
K1LSB wrote:Richie,
Neither RX1 or RX2 are receiving any signal for me. Attached are screenshots of my ADC tab and the generated ErrorLog.
Radio is black case 7000DLE MKII running Protocol 2.
Thanks,
Mark
Capture.PNG
ErrorLog.jpg
uninstall through windows, go into the thetis install folder, remove any dll's that are left. It looks like your install process did not put the new channelmaster.dll in there which has that new function SetAudioAmpEnable.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
w-u-2-o wrote:Argh! Yes, I meant "ZZUT", my apologies. I'm not dyslexic, really!
yes replicated here, will look to fix it this evening if I can stay awake
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
I have a curious installation / startup problem beginning approximately with V2.9.0.
Upon clicking the Thetis icon, the splash screen will open and progress with Loading Settings down to about 8 or 7 seconds. At that time installation activity ceases.
Leaving it at that stage and again starting Thetis a warning of 'other Thetis instances running' pops up. Clicking Yes to continue allows it to continue to move forward. At that time error messages regarding enabling CAT on COM1 appear. Clicking through about 3 instances of that warning allows Thetis to then open. A 2nd instance of Thetis appears in the Apps section of the Task Manager. Clicking Power allows Thetis to then run. Then closing Splash under the 1st instance of Thetis and End Task then closes the 1 instance.
The 2nd issuance of Thetis seems to continue to run okay. Perhaps I haven't achieved a complete uninstall of Thetis prior to the later fresh install.
Please pardon me if this has been addressed elsewhere.
Thoughts..?
73,
Dick - KA5KKT
PS 7000DLE MKII - Thetis 2.09.01
Upon clicking the Thetis icon, the splash screen will open and progress with Loading Settings down to about 8 or 7 seconds. At that time installation activity ceases.
Leaving it at that stage and again starting Thetis a warning of 'other Thetis instances running' pops up. Clicking Yes to continue allows it to continue to move forward. At that time error messages regarding enabling CAT on COM1 appear. Clicking through about 3 instances of that warning allows Thetis to then open. A 2nd instance of Thetis appears in the Apps section of the Task Manager. Clicking Power allows Thetis to then run. Then closing Splash under the 1st instance of Thetis and End Task then closes the 1 instance.
The 2nd issuance of Thetis seems to continue to run okay. Perhaps I haven't achieved a complete uninstall of Thetis prior to the later fresh install.
Please pardon me if this has been addressed elsewhere.
Thoughts..?
73,
Dick - KA5KKT
PS 7000DLE MKII - Thetis 2.09.01
Re: Thetis v2.9.0 - Updates and Issues
@Dick - KA5KKT
1) reboot
2) uninstall
3) check folders
C:\Program Files\OpenHPSDR\Thetis
or
C:\Program Files (x86)\OpenHPSDR\Thetis
have no lingering dlls
4) reinstall
5) run up thetis and leave it start
If it is stuck again, make sure there are no popup windows behind the splash screen, by hovering over Thetis taskbar icon to see if any other windows are there
if nothing and still stuck, check task manager for Thetis.exe. If in list end task
check for Errorlog.txt in C:\Users\<user>\AppData\Roaming\OpenHPSDR\Thetis-x64 or C:\Users\Richie\AppData\Roaming\OpenHPSDR\Thetis
Richie.
1) reboot
2) uninstall
3) check folders
C:\Program Files\OpenHPSDR\Thetis
or
C:\Program Files (x86)\OpenHPSDR\Thetis
have no lingering dlls
4) reinstall
5) run up thetis and leave it start
If it is stuck again, make sure there are no popup windows behind the splash screen, by hovering over Thetis taskbar icon to see if any other windows are there
if nothing and still stuck, check task manager for Thetis.exe. If in list end task
check for Errorlog.txt in C:\Users\<user>\AppData\Roaming\OpenHPSDR\Thetis-x64 or C:\Users\Richie\AppData\Roaming\OpenHPSDR\Thetis
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
w-u-2-o wrote:@ramdor
Now just waiting for Rob to update button and slider packs
Tricked you Scott! I updated all the slider packs last week. The bad news is that the web hosting server out in California appears to be down and apparently has been for most of the day so w1aex.com is currently dead. No word on when it will come back up.
Rob
--------
Network Issues
3 hours ago
2022-04-17 14:30 EST
Some servers (sXXX, ws01-ws09, c100/c101, and VPS) are experiencing some connectivity issues that may affect the ability of clients to access services/accounts on these servers.
This has been identified by our server health team, and they are working to resolve the issue as soon as possible.
Thank you for your patience and cooperation in regard to troubleshooting this issue. We will post further updates on this page until the issue is resolved.
"One thing I am certain of is that there is too much certainty in the world."
Re: Thetis v2.9.0 - Updates and Issues
Thanks, Rob!
Re: Thetis v2.9.0 - Updates and Issues
My host server is back up so feel free to download any of the slider packs you want/need to add the new TUNE slider. The packs are available near the bottom of the "Skins" page at:
http://www.w1aex.com/hpsdr/hpsdr.html
73, Rob W1AEX
http://www.w1aex.com/hpsdr/hpsdr.html
73, Rob W1AEX
- Attachments
-
- packs.jpg (87.74 KiB) Viewed 8205 times
"One thing I am certain of is that there is too much certainty in the world."
Re: Thetis v2.9.0 - Updates and Issues
TCI between Thetis and RF-Kit is working!
Thanks Richie!
Ernie
W2FMU
Thanks Richie!
Ernie
W2FMU
Re: Thetis v2.9.0 - Updates and Issues
W1AEX wrote:My host server is back up so feel free to download any of the slider packs you want/need to add the new TUNE slider. The packs are available near the bottom of the "Skins" page at:
http://www.w1aex.com/hpsdr/hpsdr.html
73, Rob W1AEX
looking good Rob. cheers for updating.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
Ernie wrote:TCI between Thetis and RF-Kit is working!
Thanks Richie!
Ernie
W2FMU
Ah ha !! that is great news Ernie. Fab ! Yeah is was brilliant that Ernst reached out to the RF-kit folks to find out what they required.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
ramdor wrote:@Dick - KA5KKT
1) reboot
2) uninstall
3) check folders
C:\Program Files\OpenHPSDR\Thetis
or
C:\Program Files (x86)\OpenHPSDR\Thetis
have no lingering dlls
4) reinstall
5) run up thetis and leave it start
If it is stuck again, make sure there are no popup windows behind the splash screen, by hovering over Thetis taskbar icon to see if any other windows are there
if nothing and still stuck, check task manager for Thetis.exe. If in list end task
check for Errorlog.txt in C:\Users\<user>\AppData\Roaming\OpenHPSDR\Thetis-x64 or C:\Users\Richie\AppData\Roaming\OpenHPSDR\Thetis
Richie.
Thanks, Richie.
I'll give it a go after the NASCAR race concludes. (US 'Stock Car' Racing)
73,
Dick - KA5KKT
Re: Thetis v2.9.0 - Updates and Issues
TCI is now working with RFKit amp & Thetis.
The Best just got Better.
Thanks Ritchie,
Dave
k4em
The Best just got Better.
Thanks Ritchie,
Dave
k4em
Re: Thetis v2.9.0 - Updates and Issues
Using rev. 4 now TCI with RF-Kit PA ist working. Nice!
But I have a problem with rx attentuator. Several times now after transition from tx to rx the ATT (RX1) is at maximum, but that is not indicated. ATT display still shows 0. I have to switch ATT to get attenuation to 0 again.
The problem does not happen in QSK mode. Back to SEMI the ATT is at max again.
It happens also in SSB or FM.
RX2 is attenuated in the same way. Switching RX2 ATT brings gain back to 0 on both RX1 and RX2.
It happens on 20m, 10, but not on other bands.
It think I should build a new database.
But I have a problem with rx attentuator. Several times now after transition from tx to rx the ATT (RX1) is at maximum, but that is not indicated. ATT display still shows 0. I have to switch ATT to get attenuation to 0 again.
The problem does not happen in QSK mode. Back to SEMI the ATT is at max again.
It happens also in SSB or FM.
RX2 is attenuated in the same way. Switching RX2 ATT brings gain back to 0 on both RX1 and RX2.
It happens on 20m, 10, but not on other bands.
It think I should build a new database.
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
Re: Thetis v2.9.0 - Updates and Issues
DL8LAQ wrote:Using rev. 4 now TCI with RF-Kit PA ist working. Nice!
But I have a problem with rx attentuator. Several times now after transition from tx to rx the ATT (RX1) is at maximum, but that is not indicated. ATT display still shows 0. I have to switch ATT to get attenuation to 0 again.
The problem does not happen in QSK mode. Back to SEMI the ATT is at max again.
It happens also in SSB or FM.
RX2 is attenuated in the same way. Switching RX2 ATT brings gain back to 0 on both RX1 and RX2.
It happens on 20m, 10, but not on other bands.
It think I should build a new database.
it might be an issue with the new attenuation implementation, I will do some testing later this afternoon. Perhaps some more reports will come in. Can you try to replicate and construct a procedure to make it happen on demand?
Last edited by ramdor on Mon Apr 18, 2022 1:36 pm, edited 1 time in total.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
yes, i have replicated here, working a fix now
Richie.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
Hi Richie,
it just happens and is a permanent bug. I will try to replicate the problem with a clean database now.
Edit: No problem with a clean db. Now I have to change to my preferred settings.
it just happens and is a permanent bug. I will try to replicate the problem with a clean database now.
Edit: No problem with a clean db. Now I have to change to my preferred settings.
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
Re: Thetis v2.9.0 - Updates and Issues
DL8LAQ wrote:Hi Richie,
it just happens and is a permanent bug. I will try to replicate the problem with a clean database now.
Edit: No problem with a clean db. Now I have to change to my preferred settings.
it is related to having the same adc set for both ddc2 and ddc3 in your case with 7000.
I am still working the fix.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
Richie--the ADC/ATT/RX combinations are many, as you know. If you'd like to post a list of tests for people to verify functionality on the various hardware types, Hermes to 8000, and people ran through the list, would that be helpful to you?
Re: Thetis v2.9.0 - Updates and Issues
Well any anomalies that people notice should include a report of what has happened, the method they use to replicate it, the radio model, and screenshot of the DDC/ADC page.
Norbert's issue is an issue for everyone, I have fixed it here, but still testing. It is related to the same adc's being used for the rx1 and rx2 ddc. It incorrectly modifies the TXatt.
Richie.
Norbert's issue is an issue for everyone, I have fixed it here, but still testing. It is related to the same adc's being used for the rx1 and rx2 ddc. It incorrectly modifies the TXatt.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
ramdor wrote:it is related to having the same adc set for both ddc2 and ddc3 in your case with 7000.
I am still working the fix.
Ok, I will check that with the previously used database.
Attached are the ADC settings. I don't use a 2nd antenna, so both rx are tied to ADC0.
Edit: Yes, using the previous database and default ADC settings the problem is gone!
- Attachments
-
- Thetis_2022-04-18_15-57-29.jpg (75.31 KiB) Viewed 8026 times
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
Re: Thetis v2.9.0 - Updates and Issues
DL8LAQ wrote:Edit: Yes, using the previous database and default ADC settings the problem is gone!
yes, thanks for confirming that, exactly what I replicated here. I will be rebuilding the installers in about 30 mins.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
PRE-RELEASE 2.9.0.4 updated
Uninstall, and re-install if you have used 2.9.0.4 previously !
https://github.com/ramdor/Thetis-2.9.0/ ... .9.0.4-pre
Has been updated with fixes for the ATT issue where RX1 + RX2 use the same ADC. Also added GridMin to NoiseFloor option which is early work in progress.
Uninstall, and re-install if you have used 2.9.0.4 previously !
https://github.com/ramdor/Thetis-2.9.0/ ... .9.0.4-pre
Has been updated with fixes for the ATT issue where RX1 + RX2 use the same ADC. Also added GridMin to NoiseFloor option which is early work in progress.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
Deinstalled prev ver, installed new version, but the bug is still in here! I will try later with clean db. Have to leave for ice cream and Liqueur
tasting.
"Adjust Min to Noise Floor" is a beautiful feature!
tasting.
"Adjust Min to Noise Floor" is a beautiful feature!
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
Re: Thetis v2.9.0 - Updates and Issues
DL8LAQ wrote:Deinstalled prev ver, installed new version, but the bug is still in here! I will try later with clean db. Have to leave for ice cream and Liqueur
tasting.
"Adjust Min to Noise Floor" is a beautiful feature!
can you send me your db? enjoy the tasting
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.9.0 - Updates and Issues
May be I am wrong, but this measuremet is dB and not dBm.
Not sure what PBNP is.
Not sure what PBNP is.
- Attachments
-
- Captura.JPG (23.33 KiB) Viewed 7983 times