Hermes Lite 2 problem

[alemrush]

I'm asking for a friend, he is using a Hermes Lite 2 and for the moment he is running PowerSDR with no problems. He tried Thetis 2.8.11 and he had a problem when using the PS-A on ssb each time he released the ptt (mox) to return on receive the Hermes Lite 2 and his amplifier relay made a double clic .

I don't know if the problem his hardware ( Hermes Lite 2 ) or something in his Thetis configuration.

Thanks and sorry if I'm not in the good Forum section.


73

André

VA2WR

[w-u-2-o]

André,

You might not get very good answers in this forum. Most, probably all, here are Apache hardware users, not Hermes Lite 2 users.

Since Thetis works perfectly with all Apache-related openHPDR firmware, it could very well be a Hermes Lite 2 firmware issue.

It may be better to post on a Hermes Lite related forum/list/group. The software interface between Thetis and any firmware that it might be used with is documented here:

For Protocol 1: https://github.com/TAPR/OpenHPSDR-Firmw ... umentation

For Protocol 2: https://github.com/TAPR/OpenHPSDR-Firmw ... umentation

If the Hermes Lite 2 firmware is not 100% compliant with either the P1 or P2 documentation then all bets are off.

73,

Scott

[alemrush]

I will tell my friend about it.


Thanks Scott.

André

[n1gp]

Hi André,

Try posting your question in this forum (if you haven't already):
https://groups.google.com/g/hermes-lite

-Rick / N1GP

[alemrush]

Thanks for the infos, I will look at this Forum.

Thanks Rick !

André VA2WR