Apache Labs Community Forum

I'm asking for a friend, he is using a Hermes Lite 2 and for the moment he is running PowerSDR with no problems. He tried Thetis 2.8.11 and he had a problem when using the PS-A on ssb each time he released the ptt (mox) to return on receive the Hermes Lite 2 and his amplifier relay made a double clic .

I don't know if the problem his hardware ( Hermes Lite 2 ) or something in his Thetis configuration.

Thanks and sorry if I'm not in the good Forum section.


73

André

VA2WR

André,

You might not get very good answers in this forum. Most, probably all, here are Apache hardware users, not Hermes Lite 2 users.

Since Thetis works perfectly with all Apache-related openHPDR firmware, it could very well be a Hermes Lite 2 firmware issue.

It may be better to post on a Hermes Lite related forum/list/group. The software interface between Thetis and any firmware that it might be used with is documented here:

For Protocol 1: https://github.com/TAPR/OpenHPSDR-Firmw ... umentation

For Protocol 2: https://github.com/TAPR/OpenHPSDR-Firmw ... umentation

If the Hermes Lite 2 firmware is not 100% compliant with either the P1 or P2 documentation then all bets are off.

73,

Scott

I will tell my friend about it.


Thanks Scott.

André

Hi André,

Try posting your question in this forum (if you haven't already):
https://groups.google.com/g/hermes-lite

-Rick / N1GP

Thanks for the infos, I will look at this Forum.

Thanks Rick !

André VA2WR