Page 1 of 1
NO PTT on CW mode to key amplifier or a transveter using a G-2
Posted: Wed Nov 22, 2023 5:45 pm
by KK4X
Unable to PTT my radio and amp on CW with my G-2, I am not using the Latest Thetis program i am using 10.2 it was working before and now i am unable to do cw with a amplifier or able to key my vhf transverter.. I have done a complete reset, eve deleted software and install a fresh copy of 10.2 any one out there has seen this happen before. kinda frustrating,, I think it has to do with the G2 ITS SELF.
Thanks
Ed
KK4X
Re: NO PTT on CW mode to key amplifier or a transveter using a G-2
Posted: Wed Nov 22, 2023 6:13 pm
by laurencebarker
Can you provide more detail about what is happening and what you think should be happening? I understand you are using Thetis 10.2.
"It was happening before" do you mean it was working with G2 before, same version of Thetis, or did something change?
The thing that's not working is the PTT output? Everything else is OK?
Re: NO PTT on CW mode to key amplifier or a transveter using a G-2
Posted: Wed Nov 22, 2023 11:58 pm
by BPerk
Ed,
I've been using a G2 with Thetis v2.10.3.4, plus the recent versions prior to 3.4, on CW utilizing 3 different amplifiers, and they all key up perfectly.
Can you explain more about what you are experiencing?
Bob NN5D
Re: NO PTT on CW mode to key amplifier or a transveter using a G-2
Posted: Thu Nov 23, 2023 1:53 am
by KK4X
Now I lost all external PTT on the G-2. Need to contact Apache about this now. no external PTT all Bands
Re: NO PTT on CW mode to key amplifier or a transveter using a G-2
Posted: Thu Nov 23, 2023 2:01 am
by KK4X
Also no SSB keying and modulation on the G2, but i can send CW. Crazy
e mail off to Apache.
Re: NO PTT on CW mode to key amplifier or a transveter using a G-2
Posted: Thu Nov 23, 2023 5:44 pm
by KK4X
fix the ssb problem i forgot to click on Bias on when i reinstalled the software.
its going to the Apache Labs Shop for a Diagnostic an repair. Most likely i shall sell it with its display,
once its 100 percent working.