Good Day,

I think I'm seeing similair issues with my Blue Faced 100

i.e. the corrrect filers being swtiched in/out

This is most noticable 30-50MHz, and Sub 1,8Mhz (I loose MF broadcast.)

I'm for the time being using SDR Consiole,

Normal setup is Anan 100, P2, reporting v10.7 with Thetis 2.8 ...

Folks,

Is there an organisation that can look at sick Anan 10 (not the 'e') here in the UK ?

Mine has developed possibly the sticky relay problem.. or something else ?
I can't get it transmit properly even on a dummy load..... relay just chatters.

Rx is fine from power up. Now't wrong with that ...

Hi Scott,

Many thanks for the suggestion.

I'm going to roll back,.

It seems this PC dose not like Protocol2, It's a Xeon, but thetis refuses to chat with the ANAN-10 properly, as did simon's SDR-Console.
Even have a wireshark .cap if it's any help to anyone ?

Even though the MAC address is in ...

Hi all,

I've been playing with the "new" firmware for my ANAN-10,(not the -e) together with Simon's SDR-Console and thetis.

I read elsewhere this is very much Alpha firmware, so it's expected that's it's not in production quality.

I've got it all working very nicely in the shack via a Cisco ...

Hi all,

I did dome testing at layer 2, wasn't sure what to make of the results. (win10 firewall off)

I built a VM of windows 7, which sits on the same switch as my physical workstation. no problems, all happy.
I then brewed up a Windows 10 VM, no cigar.

After some testing, it appears Thetis is ...

Scott,

Many thanks for you response..

I had a little tinker last night (work-radio got in the way of play-radio) and popped the laptop on the first switch, and lo .. every appears groovy, I could see PLT splattering HF as per normal, so all is ok with the anan-10.. I even moved the rate up until ...

Hi all,

I decided to take the plunge and move my Apache Anan-10 upto P2/10.3 and thetis v2.52 which sees the radio and reports it's MAC.

So, not quite a brick, but the problem is no Rx, nothing on the waterfall..

One thing I did notice I see in red SEQ=>32. (not sure what that is...)
Wireshark ...