Dearr juha,
my greatest wish is, that ANAN Transceivers have the possibility for qsk operation. I got a 8000DLE, that has a common relay for TR-swiching. QSK-relays may be build ourselves with reed-contacts or bought or we use pin-diodes like 1N4007.

73, Hans-Albrecht
DK 8 ND

Dear OM,
please have a look to the block schematic of the ANAN 200 or in my case 8000DLE. The antenna outputs Ant1...Ant3 are T/R-output connectors for the PA and for RX1. RX2 has an own connector RX2 Ant, as well as TVTR TX.

Use RX2_Ant as Receiver input for Your tansverter and use XVTR TX as ...

Dear David,
the problem You deal is part of the transceiver, mine is an ANAN 8000 DLE, controlled by Power-SDR. Please have a closer look to the block diagram. Find out all possible combinations of relays in the aerial path and TR-path to get familiar with, weather they seem to be useful or not ...

Dear OMs, here my problem:

My goal: Installing a new only receive band for LF 136 kHz and MF 472 kHz in the "Band-Switch" button field and assign a separate antenna-outlet to the new bands.

(1) What I did: Under the menue XVTR I created two new bands with the transverter-IF 0 Hz, that is direct ...

Dear Joe,
I kindly recommend You to use a computer only for the Anan-TRX. You may have program failures because of mismatch (high swr) , false keystrokes or of an unknown reason. I use the Anan 8k DLE without autotuner with Marconi aerials resonant for 1820 kHz, 3520 kHz and 7022 kHz. Other bands ...

Dear OMs,
I use an Anan 8000 in cw. It is not a true qsk-equipment. It uses a cheap line-isolation relay as antenna relay. Are there any possible improvement for a fast qsk -operation? I am familiar with the construction of sequencers and relays for a fast T/R-switching.
Any suggestions welcome ...