Yes it is back , better and faster! Thanks for the hard work to make our forum clear, concise and easy to use. I've got to say this is the best organized forum I've seen to date. Thanks again Scott!

Ruben,

Great question! Five years ago I did some A/B testing of the audio quality between Low Latency and Linear Phase and posted the results in this forum, and neither Scott nor myself could discern any difference in the audio. Given that Low Latency is, well, low latency, I decided that's the ...

Yep, sometimes when I'm playing in the settings I'll enable the Transmit tab's "Highlight TX Profile Save Items" so I'm kept aware of what gets saved with a TX Profile.

Mark

Capture.jpg

Mark,

I don't want to get too far off the topic but I was wondering. Most items I have read about filter ...

w-u-2-o wrote:I posted screenshots from Thetis, WSJT-X, and Fldigi.

I see. Thank you for everything you do for the ham community.

Hamlib is a software library that can be used by app developers to enable CAT comm's with a huge list of radios. It is not a separate app. Hamlib is used by Fldigi, WSJT-X and numerous other digi and logging app's.

Fldigi offers a choice of flrig, hamlib, and rigcat. Here's my setup in Fldigi ...

Is Hamlib a separate app? Sorry for the questions. I'm new to the digital scene.

(I found Hamlib) I thought I found it anyway. I downloaded and installed ver 4.6. There is no executable or icon. Is this right?

Did you try the default port number in Thetis instead?

I tried the default port also. I'll get a handle on this or bust. I also tried numerous other ports.

(correction)I got it under Com 15. The latency in Fldigi has disappeared. Thanks again Scott. I just had to keep at it until something ...

Ruben--I just upgraded my version of Fldigi to 4.2.0.6 (the release version, no .17 on the end). I can't duplicate your problem. However I may be setup differently from you. In particular I don't know what "Fldigi UDP" is.

In Fldigi I have rig control set up as follows:

Rig type "FlexRadio/ANAN ...

Ruben--I just upgraded my version of Fldigi to 4.2.0.6 (the release version, no .17 on the end). I can't duplicate your problem. However I may be setup differently from you. In particular I don't know what "Fldigi UDP" is.

In Fldigi I have rig control set up as follows:

Rig type "FlexRadio/ANAN ...

Thanks Scott. I've had this installed a few days and I didn't notice the issue until today. I'll keep digging and reading. I may learn something. I use it to talk between Thetis, the HFAUTO app and Fldigi. I bet some timing setting has changed somehow. By me? I hope not :oops:

I've yet to ...

I use Thetis, Fldigi and Fldigi UDP. I had a much earlier version of Fldigi which worked fine but was a CPU hog. 25-30% most of the time. I updated to version 4.2.06.17. The new version uses less than 1% utilization all the time. BUT, it is very slow to respond to frequency changes. If you click on ...

Have an attorney write them a letter. A lot of attorneys will do this for a nominal fee. I'm not a lawyer and this is only my opinion.

I could not find the appropriate place on Github for Thetis software requests. If there is a specific place, please direct me there.
I'll post it here if there is not. This is the first request I have made.

I'd like to see a switch to allow either a PTT like function for the TUNE button. Or an ...

I can't see any content on that site anymore, I was permanently banned 3 years ago from even viewing anything on that site, for two comments I made in the only thread I ever posted in. :|

But I don't really count that as a loss.. :P

Mark

Mark,

Banned? That's ridiculous. That forum needs all ...

I've said it before. I'll say it again. What you have accomplished is way beyond my expectations. Thank you again and take a break? You deserve it!

Untitled.png

That bottom checkmark doesn't exist in my version. There must be something I need to do before this. I also never saw an "accept" below the rules. list.. :roll:

ROLES, not RULES

Go to Server roles/roles

I did get a place to agree to the RULES when I first created a new account ...

Tony EI7BMB wrote:Untitled.png

That bottom checkmark doesn't exist in my version. There must be something I need to do before this. I also never saw an "accept" below the rules. list..

OK here is an example. Under "Roles" there is the statement, " To become a tester , to take part in active testing, provide feedback and access to early builds then click the (green checkbox) below." I see no checkbox. Anywhere. I know there is something so obvious that I'm missing it. :D

I realize ...

Thanks Richie and Rob,

Richie, the reason I have two set up is because after I followed your INVITE and set it up I realized I didn't have ready access to the several servers I already had set up. The second one I signed on as it the one I will use. Even though I am on several servers I have never ...

I did not know what group to put this in so I put it here. Please feel free to move it to where it might make better sense. My question is directed at Richie. I'd ask the question in Discord but I can't post there yet. In that app, there is a statement that indicates to place a check mark after ...

ww1wxradio wrote:Thanks for the info . . . Latest I was able to find was 2.1.18 . . . Downloaded and will update tomorrow

I am running version 2.2.2 in my MKII. There are two newer ones at the link that Rick posted above.

As I started reading this thread I thought "what! how could NR2 possibly be approved upon?" I downloaded and installed this latest development and the answer was clear. Really clear. NR2 has been surpassed all my expectations. Now where do we go? I'm sure that the developers have ideas in the back ...

Before I switch protocols I hold my left foot 6.2 inches from the floor while quacking twice. Then I feel that the Chee is just right for the change. I've had no problems with this at all. I also use this method of putting my shoes on. (sorry-I couldn't let this go by)

I purchased my 7000DLE MKII around August 2019 It was supposed to ship immediately. A month went by and no radio. I sent an email. I waited a week and no answer. And another and another. Finally it was announced that the radios would ship in time for Christmas 2019. Finally, in December I received ...

I have my MIC level set to the same 1db you have displayed there.
Make sure the LINE/INST and the PAD buttons on the UMC are both popped out.
Turn up the gain on the UMC until the CLIP led starts blinking, then back off a smidge.
Turn OFF the 48v slide switch on the back, unless your microphone ...

Correct me if I I'm in error here. Or tell me if I have it right. I am using the value of "UMC ASIO Driver" under the ASIOdrivername string in the registry. To adjust the MIC audio level I enable the MIC button on the Thetis GUI. This is after I adjust the input MIC level on the UMC202HD. This ...

Correct me if I I'm in error here. Or tell me if I have it right. I am using the value of "UMC ASIO Driver" under the ASIOdrivername string in the registry. To adjust the MIC audio level I enable the MIC button on the Thetis GUI. This is after I adjust the input MIC level on the UMC202HD. This seems ...

Ok, I give up. I went ahead and ordered a Behringer U-Phoria UMC202HD from Amazon. It will be here Saturday. I will take the Universal Audio Volt back for a refund. It's odd that it works with other applications like YouTube,but just puts out a squeaky sound with Thetis as you turn up the volume on ...

I made some changes and have built a work in progress build. Please try https://github.com/ramdor/Thetis/releases/tag/v2.10.3.6-dev

try_this.png

Yes indeed, this change made the record/playback function much better. It was usable before, but I wasn't quite coordinated enough to make it happen ...

Check that that special panafall mode is unchecked, in the spot form. It will move like that and override the position if checked and Track is ON.

special_pana.png

That was absolutely the information I needed to correct my setup. The "Special Panafall mode" box was enabled. Thanks Richie for the ...