Hi..

I buy this "Zolotarev-LPF" made by LA2NI, and this board is first now on the table and I am soldring coil and caps on it :-)
but I got some problem whit it...but as we sadly know Kjell is now SK, and not able to help anymore.

my problem it that the 3 first filter-bank is ok...but the last 3 ...

A radio is on the way from Italy to me here in Denmark

73" tnx fer help

OZ1CT Ben

Tnx Svante

so sad it is not easy to power on the radio, if you wanted to use it remote. but I think I have to look for a Anan-7000

73" OZ1CT Ben

if you have a Anan-G2 connected to a DC-PSU there is triged whit a remote-switch, will the Anan-G2 turn on / start up when there
you put AC power on the PSU ???

I run my radio remote and befor I go out and buy this radio it would be nice to know.

WTB: 7000DLE MKII

Anyone have one for sale and is willing to send it to me in Denmark

73" OZ1CT Ben

I dont own the Fiber link and the wifi link...it belongs to my ISP as this is the way they can provide internet at my summerhouse.

and it is Jordi EA3CL who help med whit the Open VPN server and it run whit no problem, when I run remote I also use PST-rotator, 2x MSHV ( V/H-pol on 144-eme) and som ...

I run my Anvelina SDR always as remote via OpenVPN out
to my Remote-qth and it works very good. the only problem is when I tx, the mic signal is the Mic is cracking on the connection, but
it is becurse I run fiber from home and the last 2km i do it buy WIFI (2.4Ghz )...but I found a software to ...

HI Scott

so if you enable as I did (red ring) in the 2 menu you have RF out on 40mhz ???

Ben

In the setup there is a "extended" mode how do this work ???

why I am asking is becource I would like to use Thetis on the 8m Band (40mhz) I can see that my TRX-board do TX on the 8m/40mhz, but my
BPF+PS-board do not allowed the RF pass true

TRX= Anan7000dle

73" OZ1CT Ben

I am running Thetis v2.10.3.6_dev8 whit cmASIO and it is really good audio coming out :-) to my speakers....no glitch at all,,,BUT when I wuld like to do digital mode as MS,FT8,FSK441,Q65 I have to change to VAC cable and then I cant hear the "tone" in my speakers (most for MS and Q65 signal)

I ...

I downloaded K9dur BandText editor and made the change 40-50mhz as 8M sub-Band
and save it...started Thetis up and imported the Database.xml file.... but it only change the Band text, so I have to
dig in to the Database.xml file whit another program

Ben

sorry but it do not worke !...... Region1 or denmark or other country...samme result :-(

I have try to put a wattmeter to the output of the motherboard and here I can se RF comming out but not after the BPF/PA...
but why the "PA-setings menu" gray out when I try to tx as I was hoping that it would ...

I am looking for a way to use Thetis to tx on 40mhz / 8m Band !

when I select "Extended" mode and Denmark in region and try to tx "out of band" I se the PA-settings the menue "gray out" and it do not slect any band, as I hope to se 6m band select as ???

is there a way to get thetis to tx out of ...

trying to disable "Gnd BPF2 on Tx" but still no audio out....

but if you have it to worke then there maybe a chance I also get it to worke

tnx fer info.

73" BEn

So you set Ur radio to only listen to RX2 and never TX, if you need then swap RX1 and Rx2 if you need !

No special setup ???

Is it possible to TX on RX1 and on the same time listen on another band on RX2 .. ????
I am building up a setup where I will use a transverter for 144mhz for local qso,and at the same time listen on HF at the same time.

I did as Scott is writing...

full speed on RX1 AF and adjust the Master AF
and the adjust the level in MSHV software for correct AF level :-)

but it wuld be nice if you have a VAC1+2 there is not indepenten of the RX1+2 AF settings, as you always can set the RX-gain for correct level.

tnx fer ...

I run my Anan remote via OpenVPN,

The Thetis software run on my home PC here at home and my Anan at the temote....and cmASIO is running fine, so maybe an idea to use VPN in sted of RDP

Ben

I am using cmASIO and when I run digital (using VAC cable to MSHV software) and you turn down the RX1af you also turn down the VAC1 af level is there a way to have a indepenten VAC 1 ????

Ben

NOW we are close to it run....PERFECT

I have now try 5,,,7,,,,9 but now up on 15 and there is no "Craking"
will try the numbers arrund and see what is best.

sounds is good....

Thanks for help....

73" Ben

I try now to use the ASIO driver in VAC and use the 48000 / 32 settings and also in the UMC control panel I select the same numbers.....but when Tetis start up it change the buffer to 2048 samples ???? why it do it I dont know

But the sound is mutch better....a real plesure to hear from the speaker ...

1. I uninstall Realtec + UMC ASISO driver
2. start up Thetis...no ASIO driver
3. plug in the USB-cable to my Behringer UMC202hd
4. install latest driver for UMC202HD
5. made the regkey setup ( and there was no emty field)
6. reboot PC
7. run the Hostsample:

driverCount = 1
UMC ASIO Driver
Press any ...

I try this Hostsample.exe and it show this:

driverCount = 2
Realtek ASIO
UMC ASIO Driver
Press any key to continue . . .

ASIO driver: [0] = Realtek ASIO
asioVersion: 2
driverVersion: 3
Name: [Realtek ASIO]
ErrorMessage: No ASIO Driver Error
ASIOGetChannels (inputs: 2, outputs: 2 ...

As you can see in the cmASIO5 the drive show up in Thetis Audio...there is no diference if I remove it from the Registry

Hostsample.exe ???? don't know this file ???


Ben

If you se in cmASIO2 picture i have set the buffer + sample rate to 4800 /64 but the ASIO do not run !!! i can only get the ASIO to run if I use the VAC (look in cmASIO3 picture...and when I start VAC it change the samplerate to 2048 ??? why ???

the cmASIO4 show the driver version

I started to run ...

Trynig to get this cmASIO up and run on my PC.... but I dont se any "cmASIO sign" on my screen ???? if no sign then it is not working ????

I can only see the "TCP/IP Cat server" is running

73" Ben

Hi Mark

Here a video of the radio radio...

https://youtu.be/h7eL-OLQPXY?si=BJd14M_PEVhAspoQ

Today i got my Anan-7000-clone up and running remote whit OpenVPN and it work ok. at home I have a 300Mb fiber line and on the remote a WIFI 5Ghz whit 60/30Mb

this video is made with my phone...not the best sound quallity .....file is to big to attach here so here is a link for it:


https://photos ...

NC3Z wrote:https://community.apache-labs.com/viewtopic.php?f=9&t=4835&p=26889&hilit=auto+agc#p26889

TNX fer the link....a lot of readings...Thanks!

73" OZ1CT Ben