Morning Richie

Does that teasing image mean you have split the VFO A & B into separate items


Thanks
Paul

Thanks as always Richie, look fwd to playing with the new meters.
I just need some clever person to point me in the right direction to get the info from my SPE 1.3 amp into the new meters.


Cheers
Paul

Sorry Arnie, that's the only one that I am aware of.
Maybe someone else knows better ?

Paul

Hi Arnie

Se attached screen shot

Paul

Any chance this could be pinned to the top of the list, really useful for rarely used functions.


Thanks
Paul

Very helpful

DE9 DB15
Pin 5 Pin 4 Ground
Pin 2 Pin 9 TX 232
Pin 3 Pin 1 RX 232

Is what has worked for my

Many thanks Richie and all others involved.

The rate of these updates has kept this the most interesting SDR radio ever.
I remember in the early days of Flex they said it would be like having a new radio every other week.
Well you have made this a reality and perhaps someone at EE should take note ...

I have been using the new ASIO config for just over a week and the only issue I am having is that sometimes I have no TX audio and need to reboot the PC. I have tried restarting Thetis but this doesn't resolve the issue. Vac audio is working if I switch to Digital mode just the Mic isn't on SSB. As ...

Hi Paul,

You don't have to remove the whole reg key. You can just delete the text of your asio driver name within the key value, or you can mangle the name somehow (like adding a bogus character or something). Whichever seems easiest for you.

Stay tuned for a finalized guide to replace the ...

First of all a big thanks as always for your incredible work Richie.
The rate at which you are releasing these updates is amazing.

I have updated without issue and added the reg key for the ASIO audio as described.
All works so far so good.

Can you confirm that if I want to use the front panel ...

Thanks Richie

Can now come off digital mode without thinking my hearing has gone all muffled

You are a star, thank you so much
Paul

Richie you spoil us

Thanks
Paul

Hi Richie,

Good to see you back. One thing that bugs me is RX eq status doesn't save with TX profile. If I go onto Digital mode then switch back to SSB then RX EQ is always off and I have to reenable it. Would be nice if it was saved with TX profile.

Cheers
Paul

Thought I would share where I have placed things.
One request would be if a container could be made pop outable by just clicking anywhere in it, so it acts more like a shortcut button.
As you will see I have the cross needle meter very small, next to the magic eye across the top.
Obviously that is ...

Christmas Day has finally arrived

Thanks for this Richie, I look forward to having a play over the weekend.

I think your screen name should be changed from Ramdor to Santa !!!
Earnst you are number one elf for all your artwork


Thanks again
Paul

I have just acquired a MP3 e2 controller and having good fun configuring it although I do keep changing my mind on what goes where.
The 2 x pitch control knobs top left and right I can only get to act as a switch. In set up I move anticlockwise and the value goes to 127 even just moving it by one ...

If you want to test the router and have two PCs you can dedicate to the task, here are two different tools you can use:

https://software.es.net/iperf/
https://www.tamos.com/products/throughput-test/

In both cases you set up one machine as a server, the other as a client. Then you run the test ...

Don't know why but turned the radio on this morning to try do some more test and it has worked faultless all day :lol:

Trouble is I don't think I had done anything different in the router last night before I gave up and went to bed so non the wiser as to what the cause was. Anyway as long as it ...

I have been provided a new router by my ISP as my previous one lost the lan port in a recent storm.

Connected to the 4 gigabit lan ports I have 2 PC's and my Anan 7000 MK2 (Protocol 2)
After running Thetis for around 5 mins the audio gets choppy, I have speakers connected to the back of the Anan so ...

Hi Chris

As Scott says the profile should do the trick but if it doesn't there are also a couple of possible settings in setup.

The first is under the Audio tab, then VAC1 on the lefthand side there is an option Auto Enable. This disables vac for all other modes so you want it unchecked.

Second ...

That's looking good Richie, where do I send the coffee ?

Richie I saw the post earlier asking the same question I had about the ability to save PA profiles per mode. After having played with it I think it might work better if there were tied to your TX profiles ?
Don't know if this would be easier to implement and not sure how TX profiles work with CW ...

Install over the top failed, error Tune drv (I think it said, didn't save the screen shot)
Uninstalled and re installed without issue.

Can the power profiles be assigned to mode?


Thanks for my new toys Richie.

Paul

Thanks for the clarification guys, least I am not missing a trick.

Richie I was referring to item 11 on the original wish list thread
https://apache-labs.com/community/viewt ... f=9&t=3861

Thanks again
Paul

One of the items on the old wish list was the need to find out if the PTT jack on the back can be controlled directly. This was marked as done in version 21j. Now having looked at the posts from around that time and having watched Richies you tube vid am I correct in thinking the PTT jack couldn't ...

I updated to 2.9.0.3 and I claim the Auto AGC Gain is STILL BROKEN:
One image is the settings I am using, I INTEND to be just below the band noise so I pick up digital message.
the other image is the Thetis GUI... it shows where the AGC Gain is set, clearly not where it should be!!!

AGC Gain ...

Rich,Thanks for the info on the EQ's.
This rear speaker mute started with RC3, upon startup and pressing the power button the rear speaker is muted but not the front headphones. to unmute you either hit the tune, any band buttons or the mouse wheel to change the freq.
Thank Darrell

anyone else ...

NC3Z wrote:

m1tzr wrote: Also the new info bar you say "click the bar to cycle pages" Where is it located, I can't see it for looking?

This is the Info Bar, click anywhere in this area.


Screenshot 2022-03-08 065857.PNG.jpg

Thanks Gary.....
I was looking for a button Dohhhh....

Paul

Tony EI7BMB wrote:Hi Paul, try saving the TX profile and any changes you make should stick.

Thanks for the suggestion Tony, that seems to have done the trick. Had to save the profile for each one separately. While on the subject of saving settings, any idea what saves the RX EQ state ?


Paul

Hi Richie

I’ve been looking through some of the filter settings today and noticed this error, I’ve never noticed it before. Just wondering if I’ve got them set right cheers mate.


Hi Richie

I have finally got around to installing and playing with the new version and noticed the same error on ...