Check background task priority under power settings or related power settings.

Latest I9, I7 and i5 processors have 2 threads per core and 1 thread per core in efficiency cores.
In multi-core scenario efficiency cores and threads do count for the total computing power of the processor so I think they are good for thetis.

73

It seems to work ok today!! Maybe it was my system at that specific time. AMD win10

In the topic of equalizer did anyone notice that eq is terribly slow or unresponsive compared to the rest of menus?

This is a dream Richie.
Kudos my friend

Mike
SV1JSO

A friend looking for used 16bit 100W Anan in EU. If you have something let me know.

Regards

Mike SV1JSO

Actually except from the detailed pan-adapter that wu2o described you can see also 0 to 60mhz in a extra window.

Hi Ron,

Previously, 31dB of 'TX' attenuation was always applied when PS-A was off

Richie made a change so that whenever change tx mode the att is not resetting back in 31db. So if you use your transceiver with or without amp in different modes is very easy to overdrive your input.

Mike SV1JSO

Read here:

viewtopic.php?f=9&t=3817&p=19100#p19099

Regards

Mike SV1JSO

This problem is VAC instability.

Mike

I am tired of all the evangelists of the things that will come. We will have a better NR. We will have pure signal etc... We will develop our software better than yours etc. When you do that come here and say that I have a better product than yours come and buy it. Until then please stay in your ...

Living in a noisy environment I know that NB2 depending on the surrounding signals can also show the same or similar behavior. And from what I see in your video you had NB2 on.

Regards
Mike SV1JSO

Three days ago I was in a qso with Pure Signal enabled and Diversity enabled. Casual talk not too many mics. After an hour and during tx everything froze. Power off was working on the program but when I power on the software nothing on the waterfall. Restart computer the same. Restart 7000 the same ...

Richie could you please let us know why the change in AND behavior ?
For me it is a problem when I use ssb with linear and then I switch to digital with higher anan power (without linear).

Regards

Mike SV1JSO

Attached in word format.

Regards.

Mike

Hello Richie,

I use the TCI for log4om and tuner reminder with success but after an hour thetis shut down. Now when I try to connect something to the TCI server I get the following in the error log and thetis shutting down.

Entry : 3:20:37 PM Tuesday, February 15, 2022
Object reference not set to ...

Yes everything is correct. Radio is 7000dle and Alex is checked.
If yours is working ok I'll do a database reset and try again.

I 'll report back later.

Thanks Richie.

Mike SV1JSO

Start the radio with vfo sync. Go to whatever band you like and open the setup screen. You will see the second receiver filter that is selected with the dot inside the circle. If it is in the correct band change band to see if it is following the frequency. Mine is not following the frequency change ...

Radio is 7000 blue face and protocol 2.

Yes frequency is updated.

Thanks
Mike SV1JSO

Thanks Richie for the reply,

I was talking about the band pass filters of the second receiver: Setup/General/ANT/Filters/BPF2.

Regards

Hello,

Happy new year to everyone and thanks Richie for your efforts.
I see a small bug but I am not sure if is the latest version or something in my database.
I use diversity a lot and the second receiver filters are not following the main receiver. I use the VFO Sync all the time for this. The ...

Also here works without a problem.

Hi Enzo,

Ctune must be disabled.
Sample rate must be the same in thetis vac and cwskimmer.

Mike

You can go to settings, general, ADC and assign everything to ADC0 in order to use the second receiver from the main antenna.

Mike

What Joe accomplished, and I was asking, is that the tune button is not enabling the PTT out.

From what I understand he modified Thetis and disabled the PTT out and enabled it with OC outputs. You may see the disabled PTT menu in Thetis configuration in the above screenshot.

Nice Joe,

waiting for more info.

Mike
SV1JSO

D22 had a hole on top and it was 10 ohm resistor!! D20 also was dead but not sorted. And I had the idea that I was taking good care of it! I removed the D22 and the second receiver was back to normal. Waiting now for replacement parts.

Mike
SV1JSO

Thanks Scot for the suggestion but everything is 10db down. Noise floor signals everything. Reception as I wrote before is good. The second receiver can decode signals in the noise as the first one.

Mike
SV1JSO

Like N4XD I observed lower noise floor on second receiver with thetis 2.8.11 in my 7000 dle. The second receiver hears as well as the first one but the noise floor and signals are about 10db lower than the first receiver.
Is easy to check this by unplugging the antennas and watching the noise floor ...