I'm another fan of the JBL 308 speakers.

I use them in my shack (mostly for music as I use headphones for contesting) I've been really impressed with the sound quality.

73,

George / W7GES

It's working FB Richie!

The new VFO for the meter containers is awesome...

Thanks for your hard work...

73,

George / W7GES

Richie - Thanks! This looks terrific.

I watched the vids and it looks like it will be a piece of cake to output tcp/ip data from any of the devices connected to my Node-Red server.

I will play around with this after your release.

Now I will need to decide if I want to display power out from the ...

Yes,

You need to run the P2APP on the G2 Raspberry Pi then start Thetis on the Windows computer.

73,

George / W7GES

Just happy to hear the G2 knobs are working for you now.

I still haven't tried it out much as I have a long list of items on my to do list.

73,

George / W7GES

Ken,

Join the nodered-hamradio forum on groups.io

There are a few of us that have Anan rigs and there are examples for a lot of amps / antenna switches / rotor controllers etc.

To answer your question, I do get the rig frequency from Thetis (Ethernet CAT) for my node-red flow. I use node-red ...

Thanks again George for the information. I set mine as yours is but still no joy. I’ve now connected straight to the PC LAN with no difference.
73 Jon

Make sure the BIND IP port in the network set up tab is set to either local host or the IP address of the computer running Thetis, not the IP of ...

Here are the settings windows from Thetis. As you can see I chose COM1 for the Andromeda tab and did not enable it on the CAT tab.

I haven't tested every panel button but AF volume / Drive / Tuning / MOX / 2 Tone / VFO work FB.

I will need to play around to see how to get the encoder push PS on ...

Laurence,

I have updated my G2 and started "playing around" with the front panel controls.

I haven't tried every control yet but I'm happy to say the majority of the ones I've tried such as the tuning encoder / volume / drive / MOX etc work well.

I'm sure there will be some tweaks necessary to ...

Juha,

Were you able to fix this by changing your N1MM macro file?

George / W7GES

Juha has an extra zero in the N1MM configuration window.

Should be 127.0.0.1:13013 not 127.0.0.0.1:13013

George / W7GES

No worries, Joe!

I hope you get the G2 you ordered soon.

It's unfortunate that nobody was able to answer your other question about cables.

I gave him a lead on a XLR to 1/4" cable that works for me off Amazon in a direct message.

JOLGOO XLR Female to 1/4/ 6.35 mm TRS Plug balanced cable 3.3 ...

Also, If you carefully position and size the VFO A and VFO B containers over the default Thetis ones you can hover your mouse over the VFO A or VFO B container and use the mouse wheel to scroll the frequency up and down...

I will add a screen shot after I'm in the shack and start the rig up next ...

Well, I wanted to come back here to make final report on delivery of my 100watt G2. It arrived today via FedEx with no call to customs needed, or tax needing to be paid for release. From preorder deposit to delivery it took from Dec 5th to Feb 20th, so 77 days or 11 weeks. Have to be patient with ...

Well, I wanted to come back here to make final report on delivery of my 100watt G2. It arrived today via FedEx with no call to customs needed, or tax needing to be paid for release. From preorder deposit to delivery it took from Dec 5th to Feb 20th, so 77 days or 11 weeks. Have to be patient with ...

Update: I cannot find p2app and FPGA FW in another location thanin N1GP's repository.


Laurence,

is the firmware also available in the DL1YCF repository? I was not able to load V12 file...

73

Volker

Volker,

I ran the git pull commands (cd github/Saturn, etc) as described in the manual page ...

Yes,

If I’m just dx’ing / rag chewing and don’t want the Heil microphone boom in my field of view I put my headset on with the mic plugged in the TRS / balanced mic jack directly.

I just wanted to let you know it works for me with a dynamic mic directly into the jack. If you have rack equipment ...

Hi Brent,

I have a G2 with Front panel display.

I have used the XLR / Balanced TRS input on the back panel successfully.

I’ve only tried it with a Sennheiser Headset with a dynamic microphone. I did listen to my transmission via an online SDR and transmitted 1000 watts on 10 meters and the ...

I just tested the Balanced mic input with my G2 w/front panel display.

I used an amplifier and transmitted 1000 watts, listening through a kiwisdr.

I could not hear any distortion on my signal. I used a Sennheiser HMD-280 microphone headset with the balanced mic input.

My normal SO2R setup uses a ...

I really like the ELAD TM-2...

It has a small LCD screen that shows the frequency / mode / signal strength. I set the background LED to blue when VFO A is selected and yellow when VFO B. Transmit turns the LED Red.

There are knobs for vol / mult / VFO.

My favorite part is that I can set VFO A to ...

I had terrible power line noise to my NE that the NB circuit in Thetis (or my TS-890) could make a dent with.

Sometimes it was easier to aim my beam SW to work Europe since I could hear them better off the back of the beam (and no this wasn’t during times when Long Path was open).

Using Thetis I ...

I was able to get the repository url changed and the pihpsdr software updated using your instructions.

No error messages or prompts for username / password so I can't comment on how to proceed in those circumstances.

I am using a G2 w/front panel.

Thank You Rick and Christoph

73,

George / W7GES

Thanks Richie,

I appreciate your hard work on Thetis.

The pre-release is working well for me.

Thanks again,

George / W7GES

Sale was not finalized...

I purchased a G2 so I don’t need my 7000 DLE MK II any longer.

I purchased this new direct from Apache Labs and received it in late June 2021. It has Protocol 2 loaded.

No issues, smoke-free shack, no pets, etc.

I didn't like the front panel power switch upside down so ...

I'm not sure which decoder software you're using but it doesn't really matter as the basic setup is the same for all...

Select the audio source from Thetis in the RTTY software decoder menu (same one you use for WSJT-x, etc) for transmit and recieve.

I have a separate Thetis transmit profile for ...

Hi Richard,

I haven't had time to try my G2 out with RTTY but I am using the same Thetis profile I was using with my 7000 DLE MK II so it should work fine.

I am very busy right now as I am finishing the groundwork for a 45 x 60 building and the clock is ticking on the equipment rental (Brand New ...

Bryan,

I'm using a Presonus Studio 192 mobile audio interface with my G2 Front Panel. Works well as it did with my 7000 MK II DLE.

The application that runs on the pi to interface with Thetis is p2app I'm making a guess that is an acronym for protocol 2 application.

73,

George / W7GES

Try editing the /etc/xdg/lxsession/LXDE-pi/autostart file. This worked on my G2 with front panel display.

Comment out either pihpsdr (if you have a G2 Front panel and don’t want pihpsdr to start) or p2app.

You will need to use the sudo command to run as root to edit the file.

A # sign at the ...

What procedure do you use to test the latency?